Sim2 HT 280E Installationshandbuch PDF herunterladen (Seite 18)

NORMAL:

projects the image occupying the full height of the

screen while maintaining the aspect ratio of the input signal.

When the input signal aspect ratio is 4:3 black vertical bands

are displayed on the right and left of the picture.

ANAMORPHIC:

correctly displays a 16:9 image.

LETTERBOX:

serves to display a 4:3 letterbox image (with source

signal having black bands above and below the picture) so that

it fills the 16:9 screen and maintains the correct aspect ratio.

PANORAMIC:

widens the 4:3 image and cuts off a strip from the

top and bottom. Panoramic is ideal for displaying a 4:3 image

on the 16:9 screen of the Display.

SUBTITLES:

raises the image, thus making space for subtitles.

PIXEL TO PIXEL

: runs a pixel to pixel mapping of any image, without

adapting to the screen. The image is projected in the centre

of the screen and if its horizontal and/or vertical dimensions

are smaller than the display, it is bounded by vertical and/or

horizontal black bands.

USER 1, 2, 3

: use this option if none of the others are satisfactory.

The User formulas give you the ability to continuously adjust the

picture size horizontally and vertically.

NOTE: The available regulations may vary and/or have some

limitations in operation range relatively to each selected in-

put.

For each chosen aspect, the SCREEN CONTROL command

allows you to reframe the screen to a variety of aspect ratios

and screen sizes by using an appropriate screen-masking in-

terface connected to the 12 V output socket (please refer to

the screen manufacture manual).

COLOUR TEMPERATURE

Changes the colour balance of the image.

You can define the primary colour (red, green, blue) positioning

by using 5 default settings. These settings are:

The default settings are:

NATIVE (the machine’s native primary colours)

HDTV, EBU, SMPTE-C, primary colours defined by the standards

AUTO, mode that applies one of the standard settings descri-

bed above.

For each of the settings listed in column “1 RGB” there are 9

default white balance adjustments.

The default settings are:

STANDARD applies a certain white balance depending on the

standard selected in column “1 RGB”;

HIGH - MEDIUM - LOW (default white balance levels);

Selecting the NO option causes the de-interlacer to apply a

Motion compensated algorithm optimized for video camera

signals.

NOISE REDUCTION

This adjustment serves to select the noise reduction filter va-

lue.

In this latter case, simply click on the slider and set the value

with the ◀ and ▶ keys on the remote control.

IMAGE

This menu features adjustments relating to picture position,

aspect ratio, magnification etc.

ASPECT

This adjustment allows you to change the dimensions and

aspect ratio (relationship between width and height) of the

displayed image. There are five preset aspects available and

three personalised aspects (with user-settable parameters). You

can select a different aspect for each source: the selected

aspect ratio will be automatically applied the next time the

relative source is called.

You can also select the required aspect ratio by repeatedly

pressing the key , or by pressing and a numerical key

(1...8).The following aspects are available:

Brightness

Contrast

V ideo

S-V ideo

RGBS

YCrCb

RGB Grafico

HDMI™

RGBS 15kHz

YCrCb 15kHz

Adjustments

Inputs

Colour - -

- - -

- -

T int

Sharpness

Sharpness Mode

Filter

Present only if the V ideo Standard is NTSC

Cinema Mode

V ideo T ype

Noise reduction

Flesh tone correction

Downloaded From projector-manual.com Sim2 Manuals

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Sim2 HT 280E Installationshandbuch Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Sim2 HT 280E