Sim2 C3X Lumis Installationshandbuch PDF herunterladen (Seite 8)

C3X Lumis

5 CONNECTION PANEL

OUTPUTS FOR MANAGING MOTORIZED SCREENS

The C3X Lumis is equipped with three outputs (voltage

Vdc) for commanding motorised projection screens, com-

manding motorised curtains which can be used to mark off

the usable surface area of the projection screen when the

format of a projected image is changed and for controlling

an anamorphic lens.

USB - RS232 INTERFACE

The projector functions can be controlled by Personal Com-

puter or other remote control devices by connecting them

to the

RS232

USB

connectors located on the connection

panel. It is advisable to use high-quality

USB

or serial cables

in order to ensure that the electric control signals are not

degraded and are thus properly interpreted by the projector.

In order to use the

USB

port a speciﬁc SIM2 driver, which

can be supplied by your local Dealer/Distributor, must be

installed on the control PC. On request, SIM2 also provides

a document describing the protocol used for programming

remote control systems.

THE INPUTS CAN BE USED AS FOLLOWS:

(1) VIDEO

Television receiver, DVD player, Video recorder, Camcorder,

Video game console

(2) S-VIDEO

Television receiver, DVD player, Video recorder, Camcorder,

Video game console

(3) COMPONENT / RGBS

Television receiver, HDTV receiver, DVD player, Video re-

corder, Camcorder, Video game console,

Blue-Ray player;

(4) GRAPHICS RGB

Computer

(5-6) HDMI

HDTV receiver, DVD player, Video game console, Blue-Ray

player;

RS-232

VIDEO GRAPHICS RGB

HDMI 1 HDMI 2

B/PbG/YR/Pr

12v TRIG 3

12v TRIG 2

Max 100mA

12v TRIG 1

Max 100mA Max 100mA

S-VIDEO

USB

ESC

SOURCE/

VIDEO SOURCE CONNECTIONS

Connect the cables from the video sources, any serial ca-

ble from an external control device to the rear panel of the

C3X Lumis.

To get the most out of the C3X Lumis system, make con-

nections to the various signal sources using

quality cables

made speciﬁcally for video applications. Be careful to:

lay the cables so that they cannot obstruct people's 

movements;

insert the cables into the connectors with care so that 

the feet are not damaged;

do not twist or crush the cables;

do not tear the cables out when disconnecting them 

from the various equipment.

! CAUTION: Often the sources (television receivers, video

recorders, DVD players, etc.) have several outputs. To get

the most out of your system, carefully select which output

to use. Generally the type of signal that provides the best

image quality is the HDMI™ signal, followed by the RGB,

Components, S-Video and Composite Video signals, in this

order. The C3X Lumis system is nevertheless equipped

with an excellent Video Decoder and De-interlacer, so even

lower-quality signals can produce very pleasant images.

12v TRIG 3

12v TRIG 2

Max 100mA

12v TRIG 1

Max 100mA Max 100mA

The TRIG1 output is activated when the projector is switched

on (green LED on) and is de-activated when the projector is

in standby mode (red LED on). The TRIG2 output can be

set with the Screen control adjustment in the Aspect menu.

With this output it is therefore possible to command the lat-

eral motorised curtains which mark off a projection screen

to the right and to the left.

Output TRIG3 located at the back of the projector can be

used to control the operation of an eventual anamorphic

lens located at the front of the projector and can be set

from the OSD.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Sim2 C3X Lumis Installationshandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Sim2 C3X Lumis