Sim2 HTL40 Bedienungsanleitung PDF herunterladen (Seite 12)

SIM2 HTL40 LINK

RS-232C CONTROL SPECIFICATIONS

(5)

Table below associates OSD labels with returned values:

Gamma

OSD Label

Returned

value

Linear

Video

Graphics

Film

(6)

Table below associates OSD labels with returned values:

Memory

OSD Label

Returned

value

0 (Auto)

5. Examples

1. Send the simulated "SWITCH ON FROM STAND-BY AND SELECT SOURCE" Remote Control

keycode.

Remote Control allows Switching on from Stand-by via one of the keys "1", "2" ... "11", "12".

Send, for instance, the code relative to key "1":

BEEF02060080E5490100000000.

The HTL40 LINK switches on and selects Input 1.

The HTL40 LINK returns the response code: 06 (Acknowledged with no error).

NOTE: Commands that simulate keys "1", "2" ... "11", "12" switch on the unit and select the

corresponding Source.

Command that simulate key 0 switches on the unit: the last source memorised prior to switch off is

automatically selected.

2. Send the simulated "MENU RIGHT" Remote Control keycode.

Send the packet:

BEEF02060023E75A0100000000.

The OnScreen Display appers on the screen.

The HTL40 LINK returns the response code: 06 (Acknowledged with no error).

3. Send the "SET ASPECT ANAMORPHIC" Operation Code.

Send the packet:

BEEF0206009DF5840100000000.

The Aspect Ratio changes to Anamorphic.

The HTL40 LINK returns the response code: 06 (Acknowledged with no error).

4. Select "INPUT 5 (COMP RGB 1) WITH YcrCb 15kHz SIGNAL"

Send the packet:

BEEF0319005B0C01820800000000000008000000000000000000000000000000

Wait for the return code and add an additional delay of 50 ms.

Send the the code relative to the Key to which Input 5 has been assigned: for instance if the key is "3"

the code is:

BEEF02060062E44B0100000000

1 2 ... 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Sim2 HTL40 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern